CNC milling machine MAZAK VTC 800/30 SR, 6-axis with workbench 3000x800x720 mm, rotary table 500x500 mm and head 0.001°
6-Axis CNC Milling Machine with workbench 8000x2600x1400mm + rotary table with translation axis 2000x2000mm (course 1500mm), head 0.001° (new purchase, operative starting from February 2015)
PELLANDA, THE BRIDGE BETWEEN DESIGNAND REALISATION
CALATRAVA BRIDGE (VENICE - ITALY) - CONSTRUCTION OF PARTS FOR THE METAL STRUCTURE
ROAD BRIDGE CHEJU-DO ISLAND (SOUTH COREA) - CONSTRUCTION MODULAR TRAILER (TRANSPORT OF CONCRETE STRUCTURES)
PELLANDA, A STEADY GROWING COMPANY FOR FURURE-ORIENTED ENTERPRISES

Revamping

For a REVAMPING You proceed first of all with the disassembly and the testing of existing installations. You carry out an extraordinary maintenance on these, in order to bring them back as close as possible to a performance level which is similar to a new product. Therefore You perform unusual operations as the opening and cleaning of mechanical structures, or detailed analysis of electrical circuitry which have to be done to the extent possible on the ground. The machinery is lifted up in order to verify also the conditions of the lower frame and to remove the pieces. Furthermore it is subject to necessary modifications and if those are considered critical, there have to be effected also compression tests and tests for static/dynamic stress. The following step is the coating.

Once the frame is ready, You proceed with the reinstalling of the removed and repaired material and also with the fitting of the new equipment. Concluded the reassembly, the machinery is subject to the tests as if it was new: in fact, often it is very difficult for a non-expert to recognize that it is the same model, given that usually to the REVAMPING associates the aesthetic restyling.

Al fine di migliorare la navigazione per gli utenti, il sito che state visitando fa uso di cookie.